Mounting Systems x Dome Solar offers a wide range of PV mounting systems (sloped roofs, shade structures, flat roofs, ground-mounted)

Sloped roof with photovoltaic panels

Pitched-Roof System

Scroll down icon
Sloped roof with photovoltaic panels
Sloped roof series

Sloping roofs are a common foundation for photovoltaic systems, whether they are based on purlin construction or trapezoidal sheet metal roofs.

To meet these diverse requirements, specific mounting systems enable reliable, quick, and durable installation while considering technical specifications and roof sealing.

  • Quick and easy installation

    The systems are designed to allow for efficient implementation on construction sites and significantly reduce assembly effort.

  • Adaptation to different roof types

    Compatible with purlin constructions and trapezoidal sheet metal roofs, the systems offer high flexibility for different building structures.

  • Reliability and durability

    The mounting systems ensure high mechanical strength and durable integration of the photovoltaic system.

Our Products

Mounting systems with base plates

NPA+ Top

The further development of the NPA, with an upper fastening specifically for dry roof coverings

The NPA+ Top photovoltaic mounting system is designed for the installation of solar modules on pitched roofs. It is particularly suitable for buildings with dry roof coverings (corrugated metal roofs) as well as sandwich roofs. The fastening is done into the sheet metal on the upper side of the corrugations.

Discover the product

Mounting systems with base plates

NPA+ Side

NPA+ Side is a photovoltaic mounting system specifically designed for large pitched roof areas. It is particularly suitable for buildings with dry roof coverings (trapezoidal sheet metal roofs) as well as sandwich roofs.

Discover the product

Mounting systems with base plates

NPO+

NPO+ is a photovoltaic mounting system specifically developed for vertical installation on dry roof coverings (corrugated sheet roofs). Thanks to its universal and clip-on system, it allows for quick installation, facilitates maintenance, and offers high resistance to climatic loads. It is compatible with a variety of sheet metal geometries and is suitable for a wide range of applications.

Fastening in the rafter

Ital-Solar

Ital-Solar is a photovoltaic mounting system for pitched roofs. It is suitable for both dry trapezoidal sheet metal coverings and sandwich panels, and allows for reliable and secure installation of modules in landscape orientation.

Discover the product

Fastening in the rafter

Helios B²

This is an ATec-certified photovoltaic mounting system designed for sloped roofs made of trapezoidal sheet metal. Versatile, it is also suitable for sandwich panels and allows for reliable integration of solar modules in landscape orientation. This system is also available in a low-carbon steel version to combine performance with a reduced environmental footprint.

Discover the product

Mounting systems with base plates

RB Solar Tilt

The inclined photovoltaic mounting system for flat-sloped trapezoidal sheet metal roofs

The RB Solar Tilt system was developed as a direct response to an increasing reality on construction sites: installers work on trapezoidal sheet metal roofs with very shallow pitches (close to 0°) where conventional, roof-parallel mounting systems limit energy yield.

These roofs are structurally sloped, but in practice they behave almost like flat roofs. Water drainage is ensured, but the slope is not sufficient to optimize photovoltaic production.

RB Solar Tilt fills this gap by:

  • RB Solar's proven fastening technology for trapezoidal sheet metal roofs
  • with an integrated mounting solution for performance optimization

combined.

The result is a simple and quick-to-install system that transforms low-slope industrial roofs into high-performance solar surfaces.

Fastening in the rafter

Fibro-Solar

Fibro-Solar is a photovoltaic mounting system specifically designed for pitched roofs made of corrugated fiber cement sheets. It is rated under an ETN and allows for reliable landscape installation adapted to this type of roofing.

Discover the product

FAQ

Your questions about the takeover

  • Will LightX and FD3 remain available?

    Product continuity is the top priority. LightX and FD3 will remain fully available—now backed by the industrial capacity and supply chain of Dome Solar, ensuring reliable product availability at any scale.

  • Gilt „Made in Germany“ weiterhin?

    Yes. The original German suppliers will be retained. Engineering standards, requirements for structural calculations, and quality controls will remain unchanged. The German manufacturing tradition is a central part of Mounting Systems' brand identity.

  • Who can I contact for technical support?

    Your existing contacts remain unchanged. Dome Solar is strengthening local technical teams in key markets—Spain, Poland, Germany, Morocco, and beyond—to ensure strong support for EPCs and installers during the transition phase and beyond.

  • What new products are available now?

    With Dome Solar, you now have access to an expanded portfolio, including pitched roof systems (NPA, TOP, SIDE, Helios B2, Ital Solar, Fibro), RC3 carport solutions, and ground-mounted systems.

Ready to start your next
Flat roof project?

Request a quote

Download Dome Solar Catalogue