Technical details

ApplicationPitched roof – On roof
RoofingTrapezoidal sheet
Min. sheet thicknessSteel: 0.4 mm, Aluminium: 0.4 mm
Aluminum: 0.4 mm
Min. bead widthmin. 20 mm
Roof inclinationFrom 5 ° to 45 °
Module Orientationportrait, landscape
Possible height compensationUp to 5 mm for lateral holders
Distance of the fixing pointsDepends on wind or snow loads
Supporting profilesExtruded aluminium (EN AW 6063 T66)
FixationThin sheet screw 5.5 x 25 mm, TX30
Small partsStainless steel (V2A)
ColourAluminium: blank finish
CertificatesMCS BBA 0194, ETN*
Warranty10 years

* ETN certification only for portrait installation
(4/50 rail and module clips with grounding clip)

Product overview


back to top