Pitched-Roof

Trapeze

Application	Pitched roof – On roof
Roofing	Trapezoidal sheet
Min. sheet thickness	Steel: 0.4 mm, Aluminium: 0.4 mm Aluminum: 0.4 mm
Min. bead width	min. 20 mm
Roof inclination	From 5 ° to 45 °
PV-modules	Framed
Module Orientation	portrait, landscape
Possible height compensation	Up to 5 mm for lateral holders
Distance of the fixing points	Depends on wind or snow loads
Supporting profiles	Extruded aluminium (EN AW 6063 T66)
Fixation	Thin sheet screw 5.5 x 25 mm, TX30
Small parts	Stainless steel (V2A)
Colour	Aluminium: blank finish
Certificates	MCS BBA 0194, ETN*
Warranty	10 years

* ETN certification only for portrait installation
(4/50 rail and module clips with grounding clip)