E-Port Home: Spring Offers Read more

Sustainability

Mounting Systems Rangsdorf

Fighting Climate Change With Renewable Energy: We Are the Foundation

We are privileged to make a positive contribution to the energy transition towards renewable energies and a green future. For us, sustainability means not only durable and long-lasting products, but also environmental awareness and responsibility for the world of tomorrow.

Everything we do is geared towards the goal of minimizing our ecological footprint and offering only state-of-the-art photovoltaic solutions. This is achieved through optimized production processes and efficient quality and supply chain management. As an ISO-certified company, it is particularly important for us to comply with environmental requirements and regulations.

Our quality management system is certified according to ISO 9001:2015. In addition, the performance consistency of our products for steel and aluminium supporting structures is regularly assessed and confirmed according to EN1090 up to design class 2+.  

Measures to reduce the carbon footprint:

Circular economyThe products of Mounting Systems are either made of steel or pure aluminum, which is not mixed with additional materials, such as for example plastic. This ensures full recyclability without degradation of the material.
RecyclingAluminum that does not end up in the final commission is melted down to be reused.
Clever packaging technologyAll packaging is returned to the recycling loop.
In-house supplyOur machinery and equipment are partially powered by solar energy generated in-house.

An industrial dishwasher is used to remove aluminum chips from the materials, and the resulting excess energy from the machine is used to heat the water in the building.

Do you want to know more?

Contact us

Our Company

Our References

X-Win

Mounting Systems Rangsdorf

Fighting Climate Change With Renewable Energy: We Are the Foundation

The development of sustainability arises from renewable energy, which plays an important role, not only to promote an ecological culture, but also to use natural sources such as wind, sun and water, without compromising the well-being of the environment in any way. With the technological evolution, the focus of the company X-Win, which deals with the distribution of solar storage systems and inverters, both for residential and commercial, also shifts to the new solutions of the German company Mounting Systems GmbH, leader and producer of mounting systems for the installation of photovoltaic systems: flat roof, pitched roof, in-roof, ground-mounted, carports, compatible with all different brands and types of modules.

“We have chosen Mounting Systems because of the very interesting technical and economic qualities of the products – explains Davide Orciani, Managing Director of X-Win -, because of the efficiency and, above all, because their mounting systems provide for shorter installation times than others. When we met a few years ago at Intersolar in Germany, it was immediately clear to us that it was worthwhile to deepen our knowledge.

Recently, the company has also introduced carport systems for the residential market, which we are very much counting on, namely the new trend in the solar industry. In particular, they have developed 3 new products: E-Port Home for residential buildings for single and double parking spaces and with the possibility of additional features such as LED lights, favorite color and luxurious design, who want the best of the best for their electric vehicle; E-Port Line for the commercial market and E-Port Wings for the industrial sector, such as airports or large shopping centers.

Photovoltaic modules can be easily mounted on pitched roofs of different types, through a wide range of mounting materials and a wide choice of rails, very attractive from an aesthetic point of view. The main advantages include easy pre-assembly within a few minutes, intelligent connection design, significant savings and maximum durability: all components are made of extruded aluminum and stainless steel to ensure both full recyclability and high corrosion resistance.

During and after installation, we can rely on the company’s comprehensive technical support, ranging from informative webinars to installation instructions and fast deliveries. We are pleased to have such a strong business partner at our side.” 

Want to learn more about the cooperation?

Contact

Products

More References

multiwatt® Energy Systems Ltd.

Mounting Systems Rangsdorf

Fighting Climate Change With Renewable Energy: We Are the Foundation

multiwatt® Energiesysteme GmbH has been working successfully with Mounting Systems GmbH from Rangsdorf since 2011. We distribute all product ranges of Mounting Systems GmbH and can therefore offer our customers a full range, for almost all mounting requirements of a PV system. With the planning software of MS we are able to supply our customers, from Germany and abroad, with a reasonable frame statics, assembly plans and parts lists. In case of special requirements, we get immediate support from the technical support of Mounting Systems and can therefore also offer special solutions. Another strength at Mounting Systems is the quality of products, disposition, availability of goods and high reliability of deliveries. We have been able to rely on punctual deliveries for years, which strongly supports our own disposition. We are looking forward to continuing this successful partnership with Mounting Systems in the coming years and to grow further. 

Want to learn more about the cooperation?

Contact

Products

More References

Lieckipedia Ltd.

Mounting Systems Rangsdorf

Fighting Climate Change With Renewable Energy: We Are the Foundation

“This year, we have once again expanded and extended our long-standing cooperation with Mounting Systems. In addition to good product quality and excellent customer service, Mounting Systems scores with strong delivery reliability. This reliability generates a great deal of trust in employees and products.”

Want to learn more about the cooperation?

Contact

Products

More References

Boguslav, Ukraine - Sigma II

Sigma II PV Mounting System

Renewable energy for 27,000 households

The Boguslav solar plant is located in the Kiev region of central Ukraine. The plant, which provides 61 GWh of energy per year and will supply 27,000 thousand households with electricity, was realized with our adaptable Sigma II PV mounting system. 

In addition, 24,000 tons of carbon dioxide emissions can be avoided each year thanks to the solar park. Our project partner Scatec Solar operates, maintains and manages the plant. 

Project nameBoguslav
ProjectlocationUkraine
PV capacity54 MWp
Commissioning2020
Frame systemSigma II - 2V/2P

Contact us

Benban, Egypt, 130 MWp

Mounting Systems Rangsdorf

Fighting Climate Change With Renewable Energy: We Are the Foundation

Mounting Systems has supplied the first Egyptian solar tracker project in Benban with the second generation Sigma Tracker system. In cooperation with ib vogt, the two Berlin-based companies installed a project scope of 130 MWp and 1,500 Sigma Tracker systems, respectively. The Sigma Tracker was developed for use in extreme environmental conditions and is selected for projects like the one in Benban for this reason. The technical advantages of the Tracker system are particularly evident in terms of durability, the use of standard industrial components and the simplicity of installation.

Mounting Systems Benban project
Project name:Benban I, II & III
Project countryEgypt
PV capacity130 MWp
Start of operation2017/2018
Installation systemSigma Tracker

Want to learn more about the project?

Contact

Download system

to the SystemLink

Goussaincourt, France - Sigma II

Even in difficult soil conditions

References Solar Parks & Utility-Scale

Goussaincourt, France - Sigma II

In Goussaincourt, France, Mounting Systems supplied the Sigma II installation systems for a project built in collaboration with Bouygues ES. Due to the hard ground, our Sigma II was chosen as it was perfectly suited with its height adjustable split post. This, along with the relatively small cross-section of the posts, allowed for fast and efficient pre-drilling. More than 18,000 boreholes, which were backfilled with the excavated material to drive the posts, were thus drilled in less than 3 months.

Project nameGoussaincourt
Project locationFrance
PV capacity36 MWp
Commissioning2022/23
Frame systemSigma II - 3V/3P

Contact us

The US-American solar market at a glance

Mounting Systems Rangsdorf

Fighting Climate Change With Renewable Energy: We Are the Foundation

News Residential & Commercial

The US-American solar market at a glance

11.02.2021

Despite all the news about fracking and coal production, the share of renewable energies in the USA is growing steadily. As a manufacturer of PV mounting systems, we are naturally pleased about this. Currently, two million solar systems are installed in the USA. Almost half of the PV systems are located in sunny California alone. But other states are also making strong gains. Due to the closure of coal-fired power plants - as many as 18 plants were taken offline in 2018 - and the expansion of renewables, the transformation of the power sector in the U.S. continues to move forward. Renewables, including hydropower, now provide nearly 18 percent of U.S. electricity. Hydropower provides the majority of green energy, accounting for about half of the total. But photovoltaics are also driving this growth, adding nearly 12 GW of new capacity. Crystalline silicon (c-Si) solar module prices declined to about 27 U.S. cents per watt in 2018, a dramatic drop from $79 per watt (2018 U.S. dollars) in 1976.

In addition to favorable module prices, strategies to promote sustainable energy growth by setting new, ambitious clean energy targets and regulations are also on the agenda for the coming years. These are good prospects for the solar industry. The Solar Energy Industries Association projects that total installed PV capacity in the U.S. will more than double in the next 5 years. Their projections show that over 14 GW of PV capacity will be installed annually by 2023.

The American PV market

After an annual low in 2017, the solar industry recovered in recent months. After all, around 32,000 new PV systems were installed on roofs in 2018. However, uncertainties regarding solar and metal tariffs continue to weigh on purchasing decisions. One reason that in the past, the U.S. market for residential and commercial solar has shrunk. In the meantime, however, there are signs that the market is picking up again in some states, especially in California, which continues to lead the way. A landmark decision by the California Energy Commission in early 2018 is also playing an important role. Starting in 2020, all new homes will be required to have a PV system installed. This decision also has a significant impact on long-term forecasts. This, of course, has a significant impact on the residential market for PV mounting systems. In addition, demand continues to increase due to developments in the combination of photovoltaics and storage (PV + S). Here, California and Hawaii are clearly ahead in the area of "projects on order". Tesla's solar division experienced a decline. The company had to relinquish its leading role in the solar market to competitor Sunrun in 2018. Prior to that, Tesla at times accounted for one-third of all new photovoltaic installations on homes in the United States. But that could quickly change again. This year, Tesla CEO Elon Musk has announced plans to ramp up production of the solar roof, which was unveiled back in 2016, and to reach a production of 1,000 solar roofs per week by the end of the year.

Prospects for the next few years

The solar industry in the U.S. remained robust in 2018 - despite uncertainty over new tax and tariff policies. While the focus for the current U.S. administration is not exactly on expanding renewable energy, many others are filling that void. States, cities, communities, and companies continue to respond with increasingly ambitious sustainability goals that are driving solar market growth.

Mounting Systems - More than a system. It's a brand.

Akadyr, Kashakhstan - Sigma II

Yield-maximizing systems in bifacial use

References Solar Parks & Utility-Scale

Akadyr, Kashakhstan - Sigma II

Mounting Systems supplied the highly adaptable Sigma II ground-mounted system made of steel for a solar park of GOLDBECK SOLAR GmbH in Kazakhstan. The special feature of the Akadyr II project was that bifacial modules were used together with the bifacial-optimized mounting system, which guarantees maximum bifacial gain. The bifacial substructures, the high angle of inclination and the high ground clearance ensured that shading effects on the rear of the modules could be avoided. 

Project name:Acadyr II 
Project countryKazakhstan
PV capacity26 MWp 
Start of operation2020 
Installation systemSigma II - 2V/2P

Contact us

Sigma II ground mount project grid connected in Ukraine

Mounting Systems Rangsdorf

Fighting Climate Change With Renewable Energy: We Are the Foundation

News Solar Parks & Utility-Scale

Sigma II ground mount project grid connected in Ukraine

07.01.2021

The year 2021 got off to a perfect start in terms of Mounting Systems' outdoor projects. On January 1, 2021, the Kamianka project in central Ukraine was completed and put into operation. The 32 MWp photovoltaic plant was built in cooperation with project partner Scatec.

Kamianka solar park

The expected annual energy yield is about 37 GWh, and the solar plant will supply more than 11,000 households with green electricity. In addition, CO2 emissions will be reduced by more than 15,000 tons. For the Kamianka project, Mounting Systems supplied its robust and adaptable Sigma II two-post mounting systems, further strengthening its outdoor portfolio.

Mounting Systems - More than a system. It's a brand.

back to top